## Introduction
The AvA-8 buying and selling system is a complete algorithmic buying and selling resolution designed with a number of specialised modules that work collectively or independently to generate buying and selling alerts and handle positions. This handbook covers the 4 major modules: GAMMA, DELTA, EQUALIZER, and PATHFINDER.
## DELTA Module
### Overview
The DELTA module is designed for development following and primarily executes purchase orders. It makes use of a multi-level entry method with subtle place administration options.
### Key Options
– Multi-level technique with as much as 12 energetic buying and selling ranges
– Dynamic lot sizing based mostly on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Appropriate with varied buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Primary Settings
– **Buying and selling Mode**: Determines when DELTA will enter the market (tick-based, indicator-based, and so forth.)
– **Magic Quantity**: Distinctive identifier for DELTA orders
– **ADX Mode**: Filter energy for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so forth.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Mounted tons, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step measurement for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Stability, Fairness, Free Margin)
– **Lot Share**: Share of account to make use of when in share mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Share)
– **SL Mode**: Cease loss mode (None, Quantity, Share)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step measurement for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Stage Allow**: Toggle for every buying and selling degree
– **Stage Lot Dimension**: Place measurement for particular degree
– **Entry Level**: Distance from earlier degree for entry
– **Take Revenue**: TP goal for the extent
– **TP Observe**: Whether or not degree’s TP follows greater ranges
### Utilization Suggestions
1. Begin with minimal ranges (1-3) till you perceive the system’s habits
2. Use ADX filter to commerce solely throughout trending markets
3. For safer entries, allow a number of indicator filters through ON_ALL_IND mode
4. Monitor the DELTA panel within the GUI for standing and place data
5. Modify TP_FOLLOW settings to create a trailing cascade impact throughout ranges
## GAMMA Module
### Overview
The GAMMA module is designed as a counterpart to DELTA, specializing in brief positions. It shares many options with DELTA however is optimized for downward market actions.
### Key Options
– Multi-level technique with as much as 12 energetic buying and selling ranges
– Dynamic lot sizing based mostly on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Appropriate with varied buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Primary Settings
– **Buying and selling Mode**: Determines when GAMMA will enter the market (tick-based, indicator-based, and so forth.)
– **Magic Quantity**: Distinctive identifier for GAMMA orders
– **ADX Mode**: Filter energy for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so forth.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Mounted tons, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step measurement for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Stability, Fairness, Free Margin)
– **Lot Share**: Share of account to make use of when in share mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Share)
– **SL Mode**: Cease loss mode (None, Quantity, Share)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step measurement for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Stage Allow**: Toggle for every buying and selling degree
– **Stage Lot Dimension**: Place measurement for particular degree
– **Entry Level**: Distance from earlier degree for entry
– **Take Revenue**: TP goal for the extent
– **TP Observe**: Whether or not degree’s TP follows greater ranges
### Utilization Suggestions
1. Use GAMMA along side DELTA for a balanced method to market actions
2. Think about enabling GAMMA with stricter filters than DELTA for uneven buying and selling
3. For downtrend affirmation, use the ON_ADX or ON_ALL_IND modes
4. Monitor RSI ranges to keep away from getting into throughout oversold circumstances
5. Use zone filters to enter solely when value is close to provide zones
## EQUALIZER Module
### Overview
The EQUALIZER module is a threat administration system that screens your account metrics and open positions, intervening when obligatory to guard your account from extreme drawdown or antagonistic market actions.
### Key Options
– Actual-time monitoring of account fairness and drawdown
– Automated detection of development modifications
– Place balancing and hedging capabilities
– Intervention ranges from monitoring-only to full management
– Compatibility with different modules (DELTA, GAMMA)
### Settings
#### Primary Settings
– **Equalizer Mode**: Operation mode (OFF, MONITOR, PROTECT, FULL)
– **Monitoring Interval**: How usually to examine metrics (TICK, 1_MIN, 5_MIN, 15_MIN)
– **Fairness Safety Threshold**: Fairness share that triggers safety (e.g., 95%)
– **Most Drawdown P.c**: Most allowable drawdown earlier than intervention
– **Allow Counter Trades**: Whether or not to put hedging trades throughout interventions
– **Max Counter Commerce Quantity**: Most quantity for counter/hedge trades
– **Minimal Revenue Goal**: Revenue required earlier than resolving interventions
– **Max Intervention Trades**: Most variety of trades EQUALIZER can place
### Operation Modes
1. **MONITOR (EQUALIZER_MONITOR)**
– Tracks account metrics and module positions
– Supplies visible suggestions via the dashboard
– No energetic intervention
2. **PROTECT (EQUALIZER_PROTECT)**
– Consists of all monitoring options
– Takes motion when thresholds are breached
– Closes worst positions when obligatory
– Locations protecting counter trades
3. **FULL (EQUALIZER_FULL)**
– Complete threat administration
– Actively balances publicity between modules
– Locations restoration trades throughout antagonistic circumstances
– Dynamically adjusts take revenue ranges
– Implements superior hedging methods
### Dashboard Parts
– **Fairness Standing**: Present fairness as share of steadiness with drawdown
– **Module Exercise**: Energetic modules and place counts
– **Internet Publicity**: Stability between lengthy and quick positions
– **Standing Indicator**: Present operation standing with alerts
### Utilization Suggestions
1. Begin with MONITOR mode to grasp the system’s evaluation
2. Use PROTECT mode throughout risky intervals or when testing new methods
3. FULL mode is finest for knowledgeable customers who perceive the system completely
4. Set cheap thresholds based mostly in your threat tolerance
5. Monitor the dashboard recurrently to grasp intervention patterns
## PATHFINDER Module
### Overview
The PATHFINDER module is the system’s sign technology element, figuring out potential market entry and exit factors based mostly on value motion, transferring averages, and market dynamics.
### Key Options
– Separate uptrend (purchase) and downtrend (promote) modules
– Help for a number of order ranges
– Customizable take revenue and cease loss ranges
– Sign visualization on chart with arrows and textual content
– ADX development filter integration
– Automated exit on reverse alerts
### Settings
#### Module Management
– **PathFinderBuy_Enabled/PathFinderSell_Enabled**: Allow/disable modules
– **magicNumberPathFinderBuy/magicNumberPathFinderSell**: Distinctive identifiers
– **ExitOnReverseSignal**: Whether or not to shut positions on opposing alerts
#### ADX Filter
– **PathFinderBuy_ADXMode/PathFinderSell_ADXMode**: ADX filter energy
#### Order Settings
– **PathFinderBuy_1_Enabled/PathFinderSell_1_Enabled**: Allow first order degree
– **PathFinderBuy_1_Lots/PathFinderSell_1_Lots**: Place measurement for first degree
– **PathFinderBuy_1_TP/PathFinderSell_1_TP**: Take revenue for first degree
– **PathFinderBuy_1_SL/PathFinderSell_1_SL**: Cease loss for first degree
– **PathFinderBuy_2_Enabled/PathFinderSell_2_Enabled**: Allow second order degree
– **PathFinderBuy_2_Lots/PathFinderSell_2_Lots**: Place measurement for second degree
– **PathFinderBuy_2_TP/PathFinderSell_2_TP**: Take revenue for second degree
– **PathFinderBuy_2_SL/PathFinderSell_2_SL**: Cease loss for second degree
#### Visible Settings
– **ShowHistoricalSignals**: Show previous alerts on chart
– **BuyArrowColor/SellArrowColor**: Colours for sign arrows
– **ArrowSize**: Dimension of sign markers
– **ShowTextLabels**: Show TP degree labels
– **ShowSignalLabels**: Present BUY/SELL textual content on chart
### Sign Technology Logic
PATHFINDER generates alerts based mostly on the connection between value motion and transferring averages:
1. **Purchase Sign Situations**:
– Worth low MA is above minimal excessive value
– Present shut is above earlier excessive
– Final sign was not a purchase
– ADX filter confirms development (if enabled)
2. **Promote Sign Situations**:
– Worth excessive MA is under most low value
– Present shut is under earlier low
– Final sign was a purchase
– ADX filter confirms development (if enabled)
### Utilization Suggestions
1. Use the visible alerts on the chart to grasp market dynamics
2. Allow ADX filter to scale back false alerts throughout sideways markets
3. Think about setting wider cease loss in risky markets
4. Use TP markers to observe revenue targets and regulate handbook exits
5. Assessment historic alerts to grasp the system’s efficiency over time
## Integration Suggestions for All Modules
1. **Balanced Strategy**:
– Use DELTA for uptrends and GAMMA for downtrends
– Let EQUALIZER handle general threat
– Use PATHFINDER for sign affirmation
2. **Danger Administration**:
– Begin with small place sizes
– Use EQUALIZER’s safety options
– Set cheap take revenue and cease loss ranges
– Monitor drawdown and fairness metrics
3. **Dashboard Utilization**:
– Watch the ADX panel for development energy
– Verify zone panels for help/resistance areas
– Monitor RSI for overbought/oversold circumstances
– Assessment EQUALIZER standing for account well being
4. **Customization**:
– Adapt settings to your buying and selling fashion and threat tolerance
– Take a look at totally different combos of modules
– Think about market circumstances when enabling filters
—